WL0-1905 Protective Case

According to the product data, the case measures 190 x 190 x 45 mm outside and 180 x 160 x 40 mm inside, with a net weight of about 250 g. The square outline means the internal length and width are close, so there is little wasted corner space when boxy instruments, gauges or grouped small parts are placed inside. Check your item against the 180 x 160 x 40 mm internal figure and allow room for any insert or cushioning before confirming the model.

The 190 x 190 mm base is close to square, so boxy instruments, modules, grouped small parts and first aid consumables can be laid out in an orderly way, taken out without pressing against each other, and organised with dividers or trays. The PP body is injection moulded and weighs about 250 g, lighter than a metal case of similar volume, which suits long-term use on a workbench, in a service van or at a vehicle tool position.

JUNZHIJIA focuses on IP67 waterproof and dustproof protective cases, while the exact sealing configuration and test method for WL0-1905 need to be confirmed with the factory. If the working environment has specific moisture or dust requirements, state the medium, duration and acceptance criteria when enquiring, and the factory will propose a matching sealing structure and test plan rather than treating it as an ordinary storage box.

The product data lists hardware tool cases, first aid cases and medical equipment cases. With a 180 x 160 x 40 mm internal space, the case suits handheld meters, callipers, module parts, separated screws and bits, or first aid consumables such as gauze, dressings and small medicine bottles. If your items are taller than 40 mm, choose a deeper model from the range instead.

Insert, colour, logo and packaging options can be discussed with the factory under OEM/ODM supply. Common requests include an EVA or foam insert cut to hold the product, adjusting the shell colour to a brand palette, and printing a logo or applying a label on the case surface. Provide target quantity, application and delivery requirements so the factory can quote and plan tooling and production.

Lead time and minimum order quantity depend on order volume, customisation content and the production schedule at the time, and need to be confirmed item by item with the factory. A common arrangement is one piece per poly bag, then full cartons per the outer carton specification. If you need particular carton sizes, shipping marks or split quantities, mention them when enquiring so materials and production can be planned ahead.