WL0-3213 Protective Case

According to the product data, the case measures 315 x 260 x 128 mm outside and 308 x 230 x 118 mm inside, with a net weight of about 860 g. The 118 mm internal depth can hold bottles, dressing boxes and instrument pouches upright, while the 308 x 230 mm base takes a divided tray, so first aid supplies can be fixed by level and category and found quickly in an emergency.

The export data lists first aid cases as the application for WL0-3213. Compared with a soft first aid bag, a PP hard shell resists compression better when left in a vehicle, a workshop, a construction site or a public area over time, so contents are not crushed or leaked. The interior can also be organised in layers, keeping dressings, instruments and medicines separate and making routine checks and restocking easier.

The body is injection moulded in PP and the complete case weighs about 860 g. That figure comes from the 315 x 260 x 128 mm shell and its hard structure, and the benefit is rigidity, so the case does not deform easily when stacked or carried. If the case will be carried by hand over long distances, confirm before ordering whether structural parts such as a handle should be specified.

JUNZHIJIA focuses on IP67 waterproof and dustproof protective cases, and the exact sealing configuration and test method for WL0-3213 need to be confirmed with the factory. First aid supplies usually have clear moisture requirements, so state the storage environment, humidity level and acceptance criteria when enquiring and the factory will propose a matching sealing structure and any necessary testing. Where a vehicle or an outdoor post is involved, describe the exposure too, since temperature swings and condensation often matter as much as direct water contact.

Dividers, insert, colour, logo and packaging can be discussed under OEM/ODM supply. Examples include a divided tray laid out to your first aid inventory list, an EVA or foam insert, adjusting the shell colour to an organisation palette, and printing a unit logo on the case surface. Provide target quantity, the supply list and delivery requirements so the factory can quote and schedule production.

Lead time depends on order quantity, customisation content and the production schedule at the time, and must be confirmed item by item with the factory. Packing can be agreed with the order; a common arrangement is one piece per poly bag, then full cartons per the outer carton specification. If you need specific carton sizes, shipping marks or split quantities, state them when enquiring so materials and production can be planned ahead.