WL0-2005 PP Hardware Tool Case

According to the product data, the case measures 195 x 170 x 46 mm outside and 190 x 135 x 40 mm inside, with a narrowest internal width of 127 mm, lid and base depths listed as 20+20 mm, a 2.0 mm wall and a net weight of about 175 g. Because the narrowest point is 127 mm, check long tools against that width so they do not pass at the ends but jam in the middle.

A 2.0 mm wall combined with the toughness of PP is sufficient for the everyday compression and knocks a case meets in a drawer, tool bag or vehicle boot, and it is also what keeps the net weight at about 175 g. If the case will face drops, heavy loads or long-term stacking, describe the strength and stacking requirements in advance so the factory can assess a more suitable wall specification.

According to the export data, each piece is packed in a poly bag, the outer carton measures 410 x 360 x 495 mm, and there are 40 pieces per carton. That quantity suits ordering and receiving by full carton. If your channel needs a different packing format or split quantities, raise it when enquiring so the factory can confirm whether it can be adjusted.

JUNZHIJIA focuses on IP67 waterproof and dustproof protective cases, and the specific sealing structure and test method for WL0-2005 need to be confirmed with the factory. If the case will store metal tools or gauges that are sensitive to moisture, state that requirement when enquiring so the factory can propose a matching sealing structure and acceptance method. Any stronger requirement than that should be written into the order specification so it can be assessed before shipment.

The product data lists hardware tool cases as the application. The 190 x 135 x 40 mm internal space suits hand tools, bits, screws and small gauges, bringing items that would otherwise be loose in a drawer or soft bag into one place so they are less likely to bend, be affected by moisture or go missing, and are easier to count.

Insert, colour, logo and packaging can be discussed with the factory under OEM/ODM supply. Examples include an EVA or foam insert with cut-outs, adjusting the shell colour to a brand palette, printing a logo or applying a label on the case surface, and agreeing carton and shipping mark details. Provide target quantity, application and delivery requirements so the factory can quote and schedule production.