WL0-2507 PP Hardware Tool Case

According to the product data, WL0-2507 measures 250 x 210 x 70 mm outside and 245 x 175 x 64 mm inside, with a 160 mm narrowest internal point, lid and base depths listed as 32+32 mm, a 2.0 mm wall and a net weight of about 340 g. The 32+32 mm figures are the usable depths of the lid and base separately and together form a 64 mm internal height. That height suits upright bit sets, callipers and small power tool accessories, making better use of vertical space than a flat case. Check contents against 245 x 175 x 64 mm.

A 64 mm height suits items that can stand: complete bit sets, screwdriver shanks, callipers, small spanner sets or parts that need layering. Standing items up lets users see every size as soon as the lid opens instead of digging through the contents, and it reduces wear caused by items pressing on one another. If the contents are taller than 64 mm or wider than the 160 mm narrowest point, move to a deeper model in the same series. A contents list with maximum outline sizes helps the factory confirm the right model.

According to the product data, each piece is packed in a poly bag, the outer carton measures 505 x 430 x 360 mm, and there are 20 pieces per carton. The quantity per carton follows from the case volume: this model is taller inside, so fewer units fit per carton than the flat versions, and warehousing should account for carton height and stacking limits. If your channel needs a different quantity per carton, a different carton size or specific shipping marks, raise it when enquiring so the factory can confirm feasibility.

JUNZHIJIA focuses on IP67 waterproof and dustproof protective cases, and the exact sealing structure, gasket specification and test method for WL0-2507 need to be confirmed with the factory; the export data holds no sealing or test information for this model. If the case will hold callipers or coated tools that suffer in damp air, describe the working environment, such as humidity, dust and any chance of short-term immersion, along with your acceptance method, so the factory can propose a matching sealing solution in writing.

Insert, colour, logo and packaging can be discussed under OEM/ODM supply. Examples include an EVA or foam insert cut to the outline of bit sets and callipers, using the lid depth to hold slim tools in place, a body colour matched to your brand, a printed or applied logo, and customised cartons and shipping marks. The Zhongshan factory of KeXin New Materials (Guangdong) Co., Ltd. adjusts these details per order and supplies directly; provide the target quantity, contents list and delivery date for quoting and scheduling.