WL0-2805 PP Hardware Tool Case

According to the product data, WL0-2805 measures 280 x 230 x 53 mm outside and 270 x 190 x 46 mm inside, with a 175 mm narrowest internal point, lid and base depths listed as 23+23 mm, a 2.1 mm wall and a net weight of about 340 g. The 53 mm outer height keeps the case flat, and the 270 x 190 mm internal surface is enough to lay out rows of drill bits, callipers or flat gauges. Flat cases stack with a lower height profile in storage and in vehicles. Check contents against 270 x 190 x 46 mm.

A 46 mm internal height suits flat, sheet-like or low items: drill bit rows, callipers, feeler gauges, spare blades, small accessory packs and parts that need to be spread out and counted. If contents are taller, such as bit sets or tools with handles stored upright, 46 mm may not be enough and a deeper model in the same series is the better choice. Add a little clearance to the height of the thickest item, then compare the overall footprint with 270 x 190 mm.

According to the product data, each piece is packed in a poly bag, the outer carton measures 570 x 470 x 435 mm, and there are 32 pieces per carton. Because the body is flat, this model fits more units per carton than the deeper models in the same series, which suits ordering and shipping by full carton. The 570 x 470 x 435 mm carton size can be used to estimate volumetric weight and booking quantities. If you need a different quantity per carton, carton size or shipping marks, mention it when enquiring.

JUNZHIJIA focuses on IP67 waterproof and dustproof protective cases, and the exact sealing structure, gasket specification and test method for WL0-2805 need to be confirmed with the factory; the export data records no sealing or test information for this model. If the case will hold gauges, blades or metal parts that rust in damp air, state the working environment and acceptance criteria when enquiring so the factory can propose a matching sealing solution. Any required protection level should be agreed in writing on the order.

Insert, colour, logo and packaging can be discussed under OEM/ODM supply: an EVA or foam insert divided across the 270 x 190 mm surface, a body colour matched to your brand, a printed or applied logo, and customised cartons and shipping marks. The Zhongshan factory of KeXin New Materials (Guangdong) Co., Ltd. adjusts these details per order and supplies factory direct. Provide the target quantity, contents list and delivery date so the factory can quote, prepare materials and schedule production.