WL0-3218 PP First Aid Case

According to the product data, WL0-3218 measures 315 x 260 x 180 mm outside and 308 x 230 x 172 mm inside, with a 205 mm narrowest internal point, an 86+86 mm depth split, a 3.0 mm wall and a net weight of about 900 g. The 172 mm height lets tall items stand upright: infusion bags, bottled disinfectant, portable suction units or packaged instruments no longer have to lie flat, and standing them up means labels can be read as soon as the lid opens. An insert or divider can split the 308 x 230 mm base into two levels.

The empty case weighs about 900 g, and adding first aid supplies raises that noticeably, so it suits fixed storage on site or vehicle use rather than long one-handed carrying. If the case will be moved frequently, describe the transport method and carrying distance when enquiring so the factory can assess whether a handle, extra reinforcement or a different specification is needed. If the total weight matters, split the supplies across two smaller cases from the same series to reduce the weight of each.

According to the product data, each piece is packed in a poly bag, the outer carton measures 645 x 530 x 550 mm, and there are 12 pieces per carton. Because the body is tall, far fewer units fit per carton than the flat models in the series, so warehousing should pay particular attention to carton height and stacking limits to avoid crushing the lower layer. The 645 x 530 x 550 mm carton size can be used to estimate volumetric weight and freight cost. Mention any packing changes when enquiring.

JUNZHIJIA focuses on IP67 waterproof and dustproof protective cases, and the exact sealing structure, gasket specification and test method for WL0-3218 need to be confirmed with the factory; the export data records no sealing or test information for this model. First aid cases are often kept in vehicles, workshops or outdoor sites where humidity and dust vary widely, so state the actual conditions, whether short-term immersion protection is needed and how you will inspect the goods, then have the result written into the order.

Insert, colour, logo and packaging can be discussed under OEM/ODM supply: a two level insert built around a first aid inventory list, with EVA or foam cut-outs holding bottles and instruments; colour coding to separate departments or vehicles; printed institution names, serial numbers or logos on the lid; and customised cartons and shipping marks. The Zhongshan factory of KeXin New Materials (Guangdong) Co., Ltd. adjusts these details per order. Provide the target quantity, supply list and delivery date.