WL0-4312 PP Medical Equipment Case

The export data for WL0-4312 lists only a 236 mm narrowest internal point, a 3.5 mm wall, a PP body, a net weight of about 1170 g and packing details; outer dimensions, internal length and width, and the depth split are not given. No estimates or figures borrowed from other models are offered here. To check whether your equipment fits, ask the factory for measured outer and internal dimensions, the depth split and the position of the narrowest point, plus a drawing or photos if needed.

Among the 0 Series models in the export data, 3.5 mm is one of the thicker wall specifications, where most models sit between 2.0 mm and 3.0 mm. A thicker wall in PP means the body keeps its shape better under load, stacking and repeated handling, which suits portable medical equipment of some weight. The trade off is a net weight of about 1170 g, so the empty case is already fairly heavy. If the packed weight has a firm limit, state the equipment weight and handling method when enquiring.

The 236 mm narrowest internal point is a reference for the maximum width that can lie flat inside: a unit whose base or feet come close to or exceed that figure will be a tight fit or will not go in. Measure the maximum width, length and height of the equipment first, then confirm the actual internal dimensions of this model with the factory. If the unit is wide, consider a model with a wider internal space, or store it upright in a cut-to-shape insert.

According to the export data, each piece is packed in a poly bag, the outer carton measures 615 x 440 x 560 mm, and there are 10 pieces per carton. The carton size helps estimate volumetric weight and freight cost, and ten per carton suits receiving and distribution by full carton. Since the case itself is fairly heavy, handling should account for carton weight and stacking limits so lower layers are not deformed. If cases ship with the equipment or need department labels, mention it when enquiring.

Insert, colour, logo and packaging can be discussed under OEM/ODM supply: an EVA or foam insert cut to the equipment outline, a body colour of your choice, printed brand names or asset numbers on the lid, and customised cartons and shipping marks. Because this case is heavier, handles or extra reinforcement can also be discussed with the factory. The Zhongshan factory of KeXin New Materials (Guangdong) Co., Ltd. adjusts these details per order; provide the target quantity, equipment list and delivery date.