JUNZHIJIA
Model: WL6-4618 (601C)

WL6-4618 Protective Case

Cigar Humidors Precision Instrument Cases Knife Cases
WL6-4618 is a large ABS hard case in the JUNZHIJIA 6 Series for cigar humidors; precision instrument cases; knife cases. Outer 450 x 305 x 176 mm, inner 430 x 290 x 165 mm with a 25 mm lid and a 140 mm base giving 165 mm of inner height. It is moulded in ABS with a 4.7 mm wall and weighs 2775 g. It is the only model in the 6 Series whose factory usage list covers cigar humidor, precision instrument case and blade case duty at once, so a 430 x 290 mm cavity, 165 mm inner height and 4.7 mm wall make it genuinely multi-purpose. The sealed shell carries an IP67 waterproof and dustproof rating for tools, instruments, electronics and field equipment. It suits operations that want a single case type shared across departments for storage and transport. Made by Kexin New Materials (Guangdong) Co., Ltd. in Zhongshan, supplied factory-direct for OEM/ODM wholesale.

Specifications

External Dimensions450*305*176mm
Internal Dimensions430*290*165mm
Lid + Base Depth25+140mm
Wall Thickness4.7mm
MaterialABS
Weight2775g

Need a custom case solution?

Tell us your requirements — OEM / ODM, logo printing, custom foam inserts.

Send Inquiry
FAQ

Frequently Asked Questions

What are the exact outer and inner dimensions of WL6-4618?

The outer shell is 450 x 305 x 176 mm and the internal cavity is 430 x 290 x 165 mm. Externally the case occupies 450 x 305 mm of bench or shelf space while the usable floor inside is 430 x 290 mm, the difference coming from the wall section and the moulded closing geometry. Size a load from the inner dimensions, never from the outside, because outside figures overstate capacity. The 165 mm inner height is the maximum upright height available, and any lining you add reduces it further, so allow for that when the insert is designed.

What material, wall thickness and unit weight does it use?

This model uses an ABS shell with a 4.7 mm wall and a unit weight of 2775 g. The 4.7 mm wall and 2775 g weight match the 450 x 305 x 176 mm body, so it resists bulging when fully loaded and can be stacked. ABS takes up very little moisture and holds its dimensions at low temperature, which is why it is widely used for instrument and tool cases. The wall section drives compressive and impact behaviour, so how the case performs in transit and in stacks is largely set here, and the 2775 g unit weight is the figure to use for freight and pallet load calculations.

Is the case waterproof and dustproof, and to what rating?

The shell uses a sealed closure and provides an IP67 waterproof and dustproof rating. A case used across several duties is opened often, so it is worth inspecting the rim regularly to keep the dust and water protection intact. The rating applies to the sealed cavity of the case itself, so if you store moisture-sensitive contents, pair it with desiccant or a humidity management accessory and check the sealing face for trapped debris every time you close the lid, since a single trapped fragment undermines the seal.

What kinds of contents is this model suitable for?

The factory usage categories listed for WL6-4618 are cigar humidors; precision instrument cases; knife cases. It suits operations that want a single case type shared across departments for storage and transport. With a 430 x 290 x 165 mm cavity and a unit weight of 2775 g it works best as fixed-station storage or a vehicle-transport case that needs protection from moisture, dust and knocks, rather than as a container left permanently outdoors.

Related Articles