WL8-3514 PP Gun Case

According to the product data, the case measures 345 x 290 x 135 mm outside and 315 x 235 x 122 mm inside, with lid and base depths listed as 32+90 mm, a 4.9 mm wall and a net weight of about 1870 g. The 4.9 mm wall is one of the thicker specifications in the 8 Series, while the 315 x 235 x 122 mm internal space holds a complete equipment set together with an insert.

A 4.9 mm PP shell is less likely to deform when dropped, stacked under load or shipped long distance, which suits heavier equipment; the trade-off is a net weight of about 1870 g, heavier than thin-wall models. If there are specific requirements for drop height, stacking layers or transport method, describe them to the factory before ordering so the selection can be assessed.

JUNZHIJIA focuses on IP67 waterproof and dustproof protective cases, and the exact sealing structure and test method for WL8-3514 need to be confirmed with the factory. If the equipment has clear moisture, dust or immersion requirements, state the working environment, duration and acceptance criteria when enquiring so the factory can propose a matching sealing solution and any testing needed. Because heavier contents place more load on the shell, tell the factory the intended payload so the requirement can be reviewed together.

The product data lists gun cases as the application for WL8-3514, and it is often used as a protective transit solution for long precision equipment. With an insert, the 315 x 235 x 122 mm internal space can hold the main body and accessories in separate zones and reduce movement in transit; identical outer dimensions also make stacked boxes easier to load and count.

Insert cutting, colour, logo and outer carton packaging can be discussed under OEM/ODM supply, for example an EVA or foam insert cut to the equipment outline, adjusting the shell colour, printing a brand logo on the case surface, and specifying carton dimensions and shipping marks. Provide target quantity, equipment type and delivery requirements so the factory can quote and schedule production.

Lead time depends on order quantity, customisation content and the production schedule at the time, and must be confirmed item by item with the factory. Packing can be agreed with the order; a common arrangement is one piece per poly bag, then full cartons per the outer carton specification. If you need specific carton sizes, shipping marks or split quantities, state them when enquiring so materials can be prepared and production planned.