WL8-3612 PP Gun Case

According to the product data, the case measures 364 x 320 x 118 mm outside and 330 x 260 x 103 mm inside, with lid and base depths listed as 28+75 mm, a 3.3 mm wall and a net weight of about 1630 g. The 330 x 260 mm base is generous for its weight class, while the 103 mm internal height is comparatively shallow, which suits equipment laid flat.

The 330 x 260 x 103 mm internal space makes it a wide, shallow format, suitable for laying equipment flat and holding it with a cut insert so it does not shift in transit. The product data lists gun cases as the application, and the model also works as packaging for matched instrument and tool sets; if your equipment is tall, choose a model with greater internal height.

JUNZHIJIA focuses on IP67 waterproof and dustproof protective cases, and the exact sealing structure and test method for WL8-3612 need to be confirmed with the factory. Where rain, dust or short-term immersion is a risk, describe the working conditions and acceptance criteria when enquiring so the factory can confirm a suitable sealing structure and any testing needed. Because the case is shallow, confirm the space needed for insert cushioning as well before placing the order.

The body is moulded in 3.3 mm PP and the complete case weighs about 1630 g, striking a balance between weight and compression resistance: it stands up to squeezing during transport and stacking without adding as much weight as the thicker-wall models. If there are specific figures for drop height or stacking layers, confirm them with the factory before ordering.

Insert, colour, logo and packaging can be discussed under OEM/ODM supply, for example an EVA or foam insert cut to the equipment outline with recesses, adjusting the shell colour to a brand palette, printing a logo on the case surface, and specifying carton dimensions and shipping marks. Provide target quantity, equipment type and delivery requirements so the factory can quote and schedule production.

Lead time depends on order quantity, customisation content and the production schedule at the time, and must be confirmed item by item with the factory. Packing can be agreed with the order; a common arrangement is one piece per poly bag, then full cartons per the outer carton specification. If you need specific carton sizes, shipping marks or split quantities, state them when enquiring so materials can be prepared and production planned.