WL8-4114 PP Gun Case

The interior measures 385*313*120 mm and the exterior 410*370*140 mm, with a 30 mm lid depth, a 90 mm base depth, a 3.7 mm wall and a net weight of 2310 g. The 385 by 313 mm floor is one of the larger formats in the series and suits several items zoned flat, while the 90 mm base depth lets the main equipment sit low and the 30 mm lid depth takes cables and slim accessories. Allow compression allowance for foam when planning the insert.

The closed case is rated IP67 for water and dust protection, covering rain, dusty conditions and short immersion, and shielding contents from moisture and particles. The shell is injection moulded in polypropylene with a sealing structure, and the 3.7 mm wall helps maintain seating pressure between the lid and the gasket. We do not claim military standard certification for this model. Inspect the gasket periodically and dry the shell, latches and seal area after use in rain or water.

The usable floor is 385 by 313 mm with 120 mm of internal height, enough for several medium-sized items or one combined tool set. The real count depends on item shape and insert design: flat pieces can be arranged side by side in separate pockets, while taller pieces consume more depth. Send the length, width, height and quantity of each item and we will propose a zoning layout along with the right foam thickness and layering.

It suits field equipment, photographic and drone kits, watches, knives and electronic devices for transport and storage, and on-site work where several items travel in one case. The large floor and 90 mm base depth keep main items and accessories zoned inside the same case, which reduces the number of cases needed and the risk of knocks. In dusty or damp conditions, pair it with a foam insert and routine gasket maintenance for a more complete protection setup.

Yes, OEM and ODM are supported. Kexin New Materials (Guangdong) Co., Ltd. supplies factory-direct from its Zhongshan plant and can customise shell colour, silk-screen printing or nameplates, foam compartment layout and thickness, and latch and handle configuration. MOQ and lead time are confirmed after we review colour, insert process and printing requirements, and batch production normally begins once the sample is approved. Send your target quantity, application and customisation list for a quotation and delivery schedule.