WL8-4115 PP Gun Case

The case measures 405*325*154 mm outside and 380*267*140 mm inside, with a 3.4 mm wall and an empty weight of 1850 g. That gives a usable floor of 380 by 267 mm and 140 mm of internal height, which sits in the middle of the 8 Series range and stays easy to carry by hand. When laying out tool sets, instruments or equipment, leave a little clearance around each item. If a part sits close to the cavity limit, send a drawing or photo and we will check the fit and adjust the foam layout before you order.

The polypropylene shell is injection moulded with a sealing structure, and the closed case is rated IP67 for water and dust protection. That covers rain, dusty workshops and short immersion, and it keeps tools, instruments and electronic gear free of moisture and particles. We do not claim military standard certification for this model. The rating depends on the lid seating correctly on the gasket, so check the seal periodically for ageing or trapped debris, and avoid long exposure to rain or immersion once the gasket is damaged.

The body is polypropylene with a 3.4 mm wall, and the empty case weighs 1850 g. That wall keeps the shell rigid while holding the weight low enough for single-handed carrying, which suits storage, field service and after-sales tool kits that are opened and closed often. Clean the case with water or a mild detergent and a soft cloth. Avoid strong solvents, alcohol-based cleaners and abrasive pads, because they can affect the surface finish and the area where the lid meets the gasket.

The 380*267*140 mm cavity suits complete hardware tool sets, measuring instruments and electronic devices, as well as photographic gear, drone accessories, watches and knives that need protection from moisture and dust. The 8 Series is designed mainly for moving equipment and tools, and this model's 140 mm internal height works well for a single layer of flat items or a few small parts stacked together. Send the length, width, height and quantity of each item and we will design a die-cut or divided foam insert so nothing shifts in transit.

Yes. JUNZHIJIA is our own brand, produced by Kexin New Materials (Guangdong) Co., Ltd. at its Zhongshan factory, and we supply factory-direct for OEM and ODM orders. Colour, silk-screen or nameplate printing, foam insert layout and latch configuration can all be customised. Minimum order quantity and lead time depend on the chosen colour, insert process and printing requirements, and we normally confirm a sample before bulk production. Send your application, target quantity and customisation list and our sales team will quote and schedule production.