WL8-4116 PP Gun Case

The 814-A version is 410*370*165 mm outside and 385*313*145 mm inside, giving a usable floor of 385 by 313 mm. Other 8 Series cases on the 405*325 mm footprint measure 380*267*140 mm inside. Both share the same 55 mm and 90 mm lid and base depths, the same 3.7 mm wall and the same 2600 g net weight, so the real difference is the length, width and cavity width. Choose the 814-A version when you need to lay several items side by side or house broad equipment.

The closed case is rated IP67 for water and dust protection, which keeps rain, moisture and dust out and covers short immersion and dusty workshops. The shell is injection moulded in polypropylene with a sealing structure, so real performance depends on the lid seating correctly on the gasket. We do not claim military standard certification for this model. Check the gasket periodically for ageing or trapped debris, and avoid long soaking or heavy rain once the seal is damaged.

That usable floor suits complete hardware tool sets laid flat, several measuring instruments, electronic modules, and photographic or drone accessories that need protection from moisture and dust. The extra width lets you place more medium-sized items in a single layer, which avoids the awkward access that comes with deep vertical stacking. For fixed positions, send the length, width, height and quantity of each item and we will lay out foam pockets in the 385*313*145 mm cavity with finger cut-outs for easy removal.

The wall is 3.7 mm and the empty case weighs 2600 g, which is on the heavier side for the 8 Series. That weight comes from the thicker wall and the larger body, and it buys more margin against compression and impact, which suits stacked storage and rough transport. If the case is carried constantly and the contents are light, a 3.4 mm version with lower net weight may suit you better. For heavy loads and long rotation cycles, the extra rigidity is usually worth it.

Yes. JUNZHIJIA is our own brand and Kexin New Materials (Guangdong) Co., Ltd. supplies this model factory-direct from its Zhongshan factory. Die-cut foam inserts, divided layouts, body colour, silk-screen or nameplate printing and latch configuration can all be customised. MOQ and lead time are assessed against colour, insert complexity and printing requirements, and we normally confirm a sample before bulk production. Send your item list, application and target quantity for a quote.