WL8-4215 PP Gun Case

The wall is 5 mm thick, the outer size is 410*335*145 mm, the interior is 384*285*135 mm and the empty case weighs 2560 g in polypropylene. At only 145 mm tall, the case slides into equipment cabinets, shelf gaps and vehicle compartments, while the 5 mm wall keeps plenty of margin against compression and impact despite the shallow body. For heavy contents in a height-limited space, that combination is an advantage over standard-wall models.

The interior is 384*285*135 mm with a usable floor of 384 by 285 mm. It suits tools, gauges, electronic modules, photographic gear and drone accessories laid flat, meaning items that do not need to stand upright. Set the layer height from your tallest item and leave a thin cushioning foam on top. If an item comes close to 135 mm, send us the outer dimensions and we will check the fit and, if needed, move you to a taller model.

The closed case is rated IP67 for water and dust protection, keeping rain, moisture and dust out in dusty workshops, outdoor work and short immersion. The shell is injection moulded in polypropylene with a sealing structure, so real protection depends on the lid seating correctly on the gasket. We do not claim military standard certification for this model. Check the gasket and latches on a regular schedule, and avoid long soaking or heavy rain once the seal is damaged.

The low profile and the 384*285 mm usable floor suit height-limited spaces such as equipment cabinet drawers, shelf gaps, tool carts and vehicle compartments, and it also works as a shipping case included with equipment. The 5 mm wall and 2560 g weight handle repeated movement and stacking of heavier items. For stacked use, the inserts can be divided to the same outer size so kits stay consistent and spares are easy to restock.

Yes. JUNZHIJIA is our own brand and Kexin New Materials (Guangdong) Co., Ltd. supplies it factory-direct from its Zhongshan factory. Die-cut foam and dividers, body colour, silk-screen or nameplate printing, latch configuration and packaging marks can all be customised, and we take OEM and ODM bulk orders. MOQ and lead time are confirmed after reviewing colour, insert process and printing requirements, and sampling normally covers structure and appearance before bulk production. Send your equipment list and target quantity.