WL8-4814 Gun Case

The interior measures 437*308*129 mm and the exterior 463*370*144 mm, giving a usable floor of 437 by 308 mm and 129 mm of internal height, the shallowest option on this footprint. It suits flat, elongated loads such as extension rods, measuring tools, complete hardware sets and photographic or drone accessories. Because the height is limited, packing is normally a single flat layer. If an item sits close to the limit, send a drawing or photo and we will confirm the fit and adjust the foam layout before production.

The polypropylene body is injection moulded with a sealing structure, and the closed case is rated IP67 for water and dust protection. That covers rain, dusty workshops and short immersion, and it keeps equipment free of moisture and particles. We do not claim military standard certification for this model. The rating depends on the lid seating correctly on the gasket, so check the seal regularly for ageing or trapped debris and avoid long exposure to rain or immersion once the gasket is damaged.

The body is polypropylene with a 4.5 mm wall, and the empty case weighs 2960 g, one of the lighter options on this footprint. That wall keeps the shell rigid while remaining easy to handle, which suits storage and field service work where the case is opened often. Clean it with water or a mild detergent and a soft cloth. Avoid strong solvents, alcohol-based cleaners and abrasive pads, as they can affect the surface finish and the area where the lid meets the gasket.

This model uses the 463*370 mm footprint with 129 mm of internal height and a 2960 g empty weight. Taller versions on the same footprint offer 145 mm, 164 mm, 180 mm, 214 mm and 230 mm of internal height. Choose this one for thin loads where low height and low weight matter, and move up the range when you need to stack parts or carry items with handles or brackets. Send your packing list and item sizes and we will help you pick.

Yes. Kexin New Materials (Guangdong) Co., Ltd. manufactures at its Zhongshan factory under the JUNZHIJIA brand and supplies factory-direct for OEM and ODM wholesale. Colour, silk-screen printing or nameplates, foam insert layout and latch configuration can all be customised. MOQ and lead time depend on the chosen colour, insert process and printing requirements, and we normally confirm a sample before batch production. Send your application, target quantity and customisation list and our sales team will quote and schedule.