WL8-4818 Engineering PP Gun Case

The case measures 463*370*181 mm outside and 437*308*164 mm inside, with a 4.5 mm wall and an empty weight of 3163 g. That gives a usable floor of 437 by 308 mm and 164 mm of internal height, one of the taller options on this footprint. Beyond flat, long equipment, the height also takes items with handles, brackets or a thicker profile. Leave a little clearance around each item and send a drawing if a part sits close to the limit.

The body is injection moulded in engineering-grade polypropylene with a sealing structure, and the closed case is rated IP67 for water and dust protection. It handles rain, dusty workshops and short immersion, which suits workshop, field service and warehouse use. We do not claim military standard certification for this model. The rating depends on the lid seating correctly on the gasket, so check the seal for ageing or trapped debris and avoid prolonged rain or immersion once it is damaged.

This model uses engineering-grade polypropylene with a 4.5 mm wall and an empty weight of 3163 g. Engineering PP is chosen for better rigidity, impact resistance and dimensional stability under repeated opening and frequent handling, which suits a case used as a long-term tool and equipment carrier. Ask our sales team for the specific material grade and inspection documents before ordering. Clean with water or a mild detergent and a soft cloth.

The 437*308*164 mm cavity suits complete hardware tool sets, measuring instruments and electronic devices, as well as photographic gear and drone accessories that need moisture and dust protection. The taller interior makes it easier to stack small parts or house equipment with brackets, and a die-cut or compartmented foam insert keeps each item in a fixed position. Send the size and quantity of each item and we will design the insert.

Yes. Kexin New Materials (Guangdong) Co., Ltd. manufactures at its Zhongshan factory under the JUNZHIJIA brand and supplies factory-direct for OEM and ODM orders. Colour, silk-screen printing or nameplates, foam insert layout and latch configuration can all be customised. MOQ and lead time are assessed against the chosen colour, insert process and printing requirements, and a sample is normally confirmed before batch production. Send your application, target quantity and customisation list and our team will quote.