WL8-4825 PP Gun Case

The case measures 482*420*250 mm outside and 410*360*240 mm inside, split into a 40 mm lid and a 200 mm base, with a 4.2 mm wall, an empty weight of 3890 g and a usable floor of 410 by 360 mm. The 200 mm base is the deepest on this footprint, taking taller bottles and consumables upright, instruments with brackets and complete tool sets, while the 40 mm lid suits thin parts and accessories.

The polypropylene shell is injection moulded with a sealing structure, and the closed case is rated IP67 for water and dust protection. It covers rain, dusty workshops and short immersion, which suits workshop, field service and warehouse use. We do not claim military standard certification for this model. Because the cavity is deep and tends to be packed full, check the gasket regularly for ageing or trapped debris and avoid prolonged rain or immersion once it is damaged.

The body is polypropylene with a 4.2 mm wall, and the empty case weighs 3890 g. That wall and the moulded reinforcement handle normal tool and equipment loads. We do not recommend long-term overloading or concentrating very dense heavy items in one case, as it can affect how the lid closes and seals. Use both hands, support the base and keep the case level, and clean with water or a mild detergent and a soft cloth.

The 410*360*240 mm cavity suits taller bottles and consumable containers standing upright, instruments with brackets, complete hardware tool sets and electronic devices, as well as photographic gear and drone accessories stored together. The wide floor and deep cavity make it useful for carrying several similar items at once; a compartmented foam or EVA insert keeps them from moving and knocking together. Send item sizes and quantities for an insert design.

Yes. Kexin New Materials (Guangdong) Co., Ltd. manufactures at its Zhongshan factory under the JUNZHIJIA brand and supplies factory-direct for OEM and ODM orders. Colour, silk-screen printing or nameplates, foam insert layout and latch configuration can all be customised. MOQ and lead time are assessed against the chosen colour, insert process and printing requirements, and a sample is normally confirmed before batch production. Send your application, quantity and customisation list and our team will quote.