WL8-5017 Engineering PP Gun Case

The case measures 488*398*170 mm outside and 463*338*156 mm inside, with a 4.5 mm wall and an empty weight of 3350 g. Its usable floor is 463 by 338 mm, longer and wider than the 463*370 mm footprint used elsewhere in the series, with 156 mm of internal height. That takes longer equipment laid flat while still fitting items with handles or brackets. Send a drawing or photo if a part comes close to the limit.

The body is injection moulded in engineering-grade polypropylene with a sealing structure, and the closed case is rated IP67 for water and dust protection. It handles rain, dusty workshops and short immersion, which suits workshop, field service and warehouse use. We do not claim military standard certification for this model. The rating depends on the lid seating correctly on the gasket, so check the seal for ageing or trapped debris and avoid prolonged rain or immersion once it is damaged.

The body is engineering-grade polypropylene with a 4.5 mm wall, and the empty case weighs 3350 g. Engineering PP offers better rigidity, impact resistance and dimensional stability under repeated opening and frequent handling, and combined with the 4.5 mm wall it suits a long-service tool and equipment case. Ask our sales team for the specific grade and inspection documents before ordering. Clean with water or a mild detergent and a soft cloth.

The longer floor makes it easier to lay long tools and equipment in sequence, such as extension rods, spirit levels and rows of spanners, and to fit equipment with brackets as one unit. The 156 mm internal height is a middle setting that still takes thicker items alongside flat loads. Compartmented foam or an EVA insert holds long parts in place so they do not slide in transit. Send sizes and quantities and we will design the insert.

Yes. Kexin New Materials (Guangdong) Co., Ltd. manufactures at its Zhongshan factory under the JUNZHIJIA brand and supplies factory-direct for OEM and ODM orders. Colour, silk-screen printing or nameplates, foam insert layout and latch configuration can all be customised. MOQ and lead time are assessed against the chosen colour, insert process and printing requirements, and a sample is normally confirmed before batch production. Send your application, quantity and customisation list and our team will quote.