WL8-5224 Engineering PP Gun Case

The case measures 517*430*240 mm outside and 483*363*220 mm inside, with a 4.5 mm wall and an empty weight of 4160 g. It offers a 483 by 363 mm usable floor and 220 mm of internal height, so long tools lay flat in rows while taller instruments, bottles of consumables and equipment with brackets stand upright. That suits centralised storage of tool sets, measuring instruments, electronic devices and photographic or drone accessories. Send a drawing if an item nears the limit.

The body is injection moulded in engineering-grade polypropylene with a sealing structure, and the closed case is rated IP67 for water and dust protection. It handles rain, dusty workshops and short immersion, keeping equipment free of moisture and particles. We do not claim military standard certification for this model. The rating depends on the lid seating correctly on the gasket, so with a tall, well-filled case check the seal regularly for ageing or trapped debris and avoid prolonged rain or immersion once damaged.

The body is engineering-grade polypropylene with a 4.5 mm wall, and the empty case weighs 4160 g. Engineering PP offers better rigidity, impact resistance and dimensional stability under repeated opening and frequent handling, and with the 4.5 mm wall it helps a tall case hold its wall shape under load. Ask our sales team for the specific grade and inspection documents before ordering, and clean with water or a mild detergent.

The 220 mm height suits upright and stacked packing, but too many layers shift in transit. Use compartmented foam or an EVA insert to divide the cavity into stable zones and give every item a fixed position, leave clearance around upright items, and add a buffer layer on top to limit movement. Send item sizes and quantities and we will design an insert for the 483*363*220 mm cavity, with finger recesses if needed.

Yes. Kexin New Materials (Guangdong) Co., Ltd. manufactures at its Zhongshan factory under the JUNZHIJIA brand and supplies factory-direct for OEM and ODM orders. Colour, silk-screen printing or nameplates, foam insert layout and latch configuration can all be customised. MOQ and lead time are assessed against the chosen colour, insert process and printing requirements, and a sample is normally confirmed before batch production. Send your application, quantity and customisation list and our team will quote.