WL8-5718 PP Military Equipment Case

The case measures 556*363*175 mm outside and 520*296*155 mm inside, split into a 55 mm lid and a 100 mm base, with a 4.2 mm wall and an empty weight of 3490 g. That gives a usable floor of 520 by 296 mm and 155 mm of internal height, the lid accounting for 55 mm and the base for 100 mm. Leave a little clearance around each item, and send a drawing or photo if a part sits close to the limit so we can check the fit and adjust the foam layout before production.

The polypropylene body is injection moulded with a sealing structure, and the closed case is rated IP67 for water and dust protection. It handles rain, dusty workshops and short immersion, keeping tools and electronic gear free of moisture and particles. We do not claim military standard certification for this model. The rating depends on the lid seating correctly on the gasket, so check the seal periodically for ageing or trapped debris, and avoid prolonged rain or immersion once the gasket is damaged.

The body is polypropylene with a 4.2 mm wall, and the empty case weighs 3490 g. That wall combines with the moulded reinforcement of the shell to keep the case rigid while holding the weight low enough to carry by hand, which suits field service, after-sales kits and warehouse use where the case is opened and closed often. Clean it with water or a mild detergent and a soft cloth, and avoid strong solvents, alcohol-based cleaners and abrasive pads that can affect the surface and the gasket contact area.

The 520*296*155 mm cavity takes long tools, complete measuring sets and hardware laid flat, as well as photographic gear, drone accessories and electronic modules. The internal height is divided into a 55 mm lid layer and a 100 mm base, so thin parts can be stored in the lid on their own. The 8 Series is designed for transport protection of equipment and tools. Send the length, width, height and quantity of each item and we will design a die-cut foam or compartment layout for the cavity.

Yes. Kexin New Materials (Guangdong) Co., Ltd. manufactures this model at its Zhongshan factory, JUNZHIJIA is our own brand, and we supply factory-direct for OEM and ODM wholesale. Colour, silk-screen printing or nameplates, foam insert structure and latch configuration can all be customised. MOQ and lead time depend on the chosen colour, foam process and printing requirements, and production is normally scheduled after sample approval. Send your application, target quantity and customisation list and our sales team will issue a formal quotation and production plan.