WL8-5823 PP Military Equipment Case

The case measures 582*475*231 mm outside and 500*400*210 mm inside, split into a 45 mm lid and a 165 mm base, with a 4.75 mm wall and an empty weight of 5100 g. That gives a usable floor of 500 by 400 mm and 210 mm of internal height, with a deep base that leaves plenty of margin for thicker items in a single layer. Send a drawing or photo if a part sits close to the limit so we can check the fit and adjust the foam layout.

The polypropylene body is injection moulded with a sealing structure, and the closed case is rated IP67 for water and dust protection. That covers rain, dusty workshops and short immersion, and it keeps equipment free of moisture and particles. We do not claim military standard certification for this model. A taller case has a longer gasket perimeter, so check the seal periodically for ageing, distortion or trapped debris, and avoid prolonged rain or immersion once the gasket is damaged.

The body is polypropylene with a 4.75 mm wall, and the empty case weighs 5100 g. Because the base is 165 mm deep, this model uses more material than the shallow version on the same footprint and weighs about half a kilogram more. On a 500 by 400 mm floor that wall gives good rigidity, so the sides resist bowing once the case is loaded with heavier equipment. Clean it with water or a mild detergent and a soft cloth.

Both share a 582*475 mm exterior and a 500*400 mm interior. This model offers 210 mm of internal height, a 165 mm base and 5100 g empty, while the shallow version offers 165 mm of height, a 120 mm base and 4610 g, a difference of 45 mm. Choose this one for two stacked layers or items with handles, brackets or protruding parts, and the shallow one for flat loads where height and weight matter.

Yes. Kexin New Materials (Guangdong) Co., Ltd. manufactures this model at its Zhongshan factory, JUNZHIJIA is our own brand, and we supply factory-direct for OEM and ODM wholesale. Colour, silk-screen printing or nameplates, foam insert structure and latch configuration can all be customised. MOQ and lead time depend on the chosen colour, foam process and printing requirements, and production is normally scheduled after sample approval. Send your application, target quantity and customisation list and our sales team will issue a formal quotation and production plan.