WL8-6220 PP Military Equipment Case

The case measures 620*475*199 mm outside and 538*408*180 mm inside, split into a 45 mm lid and a 135 mm base, with a 5.0 mm wall and an empty weight of 5040 g. That gives a usable floor of 538 by 408 mm and 180 mm of internal height, a floor that is longer and wider than the 582*475 mm models in the same series, so equipment approaching 550 mm long lies flat with clearance. Send a drawing or photo if a part approaches the limit.

The polypropylene body is injection moulded with a sealing structure, and the closed case is rated IP67 for water and dust protection. That covers rain, dusty workshops and short immersion, and it keeps tools and electronic gear free of moisture and particles. We do not claim military standard certification for this model. The rating depends on the lid seating correctly on the gasket, so check the seal periodically for ageing or trapped debris and avoid prolonged rain or immersion once it is damaged.

The body is polypropylene with a 5.0 mm wall, and the empty case weighs 5040 g. A 538 by 408 mm floor demands more rigidity from the shell, and the 5.0 mm wall together with the moulded ribs limits how much the sides deflect once the case is full, which suits complete tool sets and instruments with real weight. Clean it with water or a mild detergent and a soft cloth, avoiding strong solvents and abrasive pads.

This model measures 620*475*199 mm outside with a 538*408 mm interior and weighs 5040 g empty. The 582*475 mm models offer a 500*400 mm interior, roughly 38 mm shorter and 8 mm narrower on the usable floor, with their own internal heights and weights. Choose this one for equipment near 550 mm long or more items in a single layer, and the 582*475 mm footprint when you want a smaller case.

Yes. Kexin New Materials (Guangdong) Co., Ltd. manufactures this model at its Zhongshan factory, JUNZHIJIA is our own brand, and we supply factory-direct for OEM and ODM wholesale. Colour, silk-screen printing or nameplates, foam insert structure and latch configuration can all be customised. MOQ and lead time depend on the chosen colour, foam process and printing requirements, and production is normally scheduled after sample approval. Send your application, target quantity and customisation list and our sales team will issue a formal quotation and production plan.