WL8-6823 PP Military Equipment Case

The case measures 677*535*225 mm outside and 595*460*205 mm inside, split into a 45 mm lid and a 160 mm base, with a 4.8 mm wall and an empty weight of 7070 g. That gives a usable floor of 595 by 460 mm and 205 mm of internal height, one of the larger floors in this group and a good match for regularly shaped, heavier equipment and tool sets. Send a drawing or photo if a device approaches the limit.

The polypropylene body is injection moulded with a sealing structure, and the closed case is rated IP67 for water and dust protection. That covers rain, dusty workshops and short immersion, and it keeps equipment free of moisture and particles. We do not claim military standard certification for this model. Because the case is large and heavy, the sealing face is long, so check the gasket regularly for ageing, distortion or trapped debris and avoid prolonged rain or immersion once it is damaged.

The body is polypropylene with a 4.8 mm wall, and the empty case weighs 7070 g, one of the heavier models in this group. A larger floor demands a rigid shell, and the 4.8 mm wall plus the moulded reinforcement reduces side deflection once heavy items are loaded, which helps with two-person handling and multi-case stacking. Clean it with water or a mild detergent and a soft cloth.

The empty case weighs 7070 g, so a loaded case becomes noticeably heavier. We recommend two people for handling, using the moulded handles and keeping the centre of gravity near the middle, and avoiding point loads on the lid during transport and stacking. Design the foam as a die-cut, layered insert so weight is carried by the base rather than the lid. Send your packing list and item weights and we will advise on the layout.

Yes. Kexin New Materials (Guangdong) Co., Ltd. manufactures this model at its Zhongshan factory, JUNZHIJIA is our own brand, and we supply factory-direct for OEM and ODM wholesale. Colour, silk-screen printing or nameplates, foam insert structure and latch configuration can all be customised. MOQ and lead time depend on the chosen colour, foam process and printing requirements, and production is normally scheduled after sample approval. Send your application, target quantity and customisation list and our sales team will issue a formal quotation and production plan.