WL8-7319 Protective Case

The case measures 733*505*190 mm outside and 650*430*170 mm inside, split into a 50 mm lid and a 120 mm base, with a 5.0 mm wall and an empty weight of 5860 g. That gives a usable floor of 650 by 430 mm and 170 mm of internal height. The 650 mm internal length takes long items up to roughly 650 mm laid flat, such as tripods, long rods, measuring devices and complete hardware sets. Send a drawing or photo if an item approaches the limit.

The polypropylene body is injection moulded with a sealing structure, and the closed case is rated IP67 for water and dust protection. That covers rain, dusty workshops and short immersion, and it keeps equipment free of moisture and particles. We do not claim military standard certification for this model. The floor and perimeter are large on this model, so check the gasket regularly for ageing, distortion or trapped debris and avoid prolonged rain or immersion once it is damaged.

The body is polypropylene with a 5.0 mm wall, and the empty case weighs 5860 g. Across the long 650 by 430 mm floor, the 5.0 mm wall and moulded ribs limit how much the sides deflect once the case is full, while the weight stays within the range one person can carry a short distance. Clean it with water or a mild detergent and a soft cloth, avoiding strong solvents and abrasive pads.

The 650*430*170 mm cavity suits tripods, long rods, measuring devices and complete hardware sets, as well as photographic gear, drone equipment, electronic modules and first aid supplies. The 170 mm internal height is made up of a 50 mm lid layer and a 120 mm base, so long items lie in the base while thin parts and accessories sit in the lid. Send item dimensions and quantities and we will design the foam layout.

Yes. Kexin New Materials (Guangdong) Co., Ltd. manufactures this model at its Zhongshan factory, JUNZHIJIA is our own brand, and we supply factory-direct for OEM and ODM wholesale. Colour, silk-screen printing or nameplates, foam insert structure and latch configuration can all be customised. MOQ and lead time depend on the chosen colour, foam process and printing requirements, and production is normally scheduled after sample approval. Send your application, target quantity and customisation list and our sales team will issue a formal quotation and production plan.