WL8-7926 PP Gun Case

The case measures 788*330*258 mm outside and 737*257*240 mm inside, split into a 65 mm lid and a 175 mm base, with a 4.0 mm wall and an empty weight of 4820 g. The 737 mm internal length is the longest in this group while the 257 mm width stays narrow, giving an elongated upright format for one or a few long items laid along the length. Send a drawing or photo if an item approaches the limit.

The polypropylene body is injection moulded with a sealing structure, and the closed case is rated IP67 for water and dust protection. That covers rain, dusty workshops and short immersion, and it keeps long equipment free of moisture and particles. We do not claim military standard certification for this model. Because the case is narrow and long, the gasket perimeter is considerable, so check the seal regularly for ageing, distortion or trapped debris and avoid prolonged rain or immersion once it is damaged.

The body is polypropylene with a 4.0 mm wall, and the empty case weighs 4820 g. Compared with the other models in this group the wall is thinner, but the cross-section is narrow, so material use and weight stay relatively low while the moulded reinforcement still meets the transport protection needs of long items. Clean it with water or a mild detergent and a soft cloth, avoiding strong solvents and abrasive pads.

The long, narrow cross-section is designed around long items. The 737 mm internal length takes tripods, long rods, support poles, light stands and long-handled tools that will not fit a standard tool case, while the 257 mm width and 240 mm height keep the footprint narrow for upright storage in vehicles and side-by-side shelving. The 240 mm height is split into a 65 mm lid and a 175 mm base, so slim parts can stand or lie at an angle. Send lengths, diameters and quantities and we will design the foam.

Yes. Kexin New Materials (Guangdong) Co., Ltd. manufactures this model at its Zhongshan factory, JUNZHIJIA is our own brand, and we supply factory-direct for OEM and ODM wholesale. Colour, silk-screen printing or nameplates, foam insert structure and latch configuration can all be customised. MOQ and lead time depend on the chosen colour, foam process and printing requirements, and production is normally scheduled after sample approval. Send your application, target quantity and customisation list and our sales team will issue a formal quotation and production plan.