WL8-6127 PP Wheeled Protective Case

The cavity measures 530*360*248 mm with a 5.0 mm wall, and the empty case weighs 5350 g, which is light for this internal size. A lighter body lets one person roll a loaded case, cutting the effort of loading and transfer, and it is easier for service staff to handle alone. Place heavier equipment towards the wheel end so the case rolls straight and stays stable.

The polypropylene shell is injection moulded with a sealing structure and the closed case is rated IP67 for water and dust protection, which covers rain, dust and short immersion. We do not claim military standard certification for this model. Check the gasket for marks, distortion or trapped debris on a regular basis, and close both latches evenly to keep the seal working over a long service life.

The flat square floor takes complete power tool sets, test instruments, electronic equipment, medical devices and small chassis products. The 248 mm depth leaves pad clearance above most items and allows an extra foam layer at the bottom. If the equipment has a handle, connector or bracket, send a drawing and the quantity, and we will check the layout against the internal size.

The shell is polypropylene with a 5.0 mm wall, and the empty case weighs 5350 g. A PP shell is light for its volume and resists chemical attack, while the 5.0 mm wall meets the rigidity needs of normal transport and storage. Clean it with water or mild detergent and a soft cloth, and avoid strong solvents, abrasive pads and long exposure to direct sun.

OEM and ODM work is supported. Kexin New Materials (Guangdong) Co., Ltd. supplies factory-direct from its Zhongshan factory, and foam inserts, colour, silk-screen printing, nameplates and latch options can all be adjusted. Inserts are best designed by the order in which items are packed; send the equipment list and outline sizes and we will quote against the 530*360*248 mm interior.