Quick answer: Industrial export kit custom plastic outer box: 560×420×230 mm, 9 cells, 8.8 kg empty, 9.02 kg volumetric, 12 to a pallet.
Table of contents
- What the Shipment Unit Means for an Industrial Export Kit Custom Outer Box
- Compartments and Single-Part Isolation
- Label Positions and the Opening Check Route
- Volumetric Weight and Pallet Layers
- Repeated Open-Close Durability in Mixed Batches
- FAQ
1. What the Shipment Unit Means for an Industrial Export Kit Custom Outer Box
A part missing at the customer's goods-in table costs more than a cracked shell. An industrial export kit custom plastic outer box is a shipment unit before it is packaging: one case, one order, case number, list and cell number locked together so a gap shows while the lid is open. Outside 560×420×230 mm, inside 515×375×195 mm, wall 4.2 mm, 8.8 kg empty, with 25 mm of egg-crate lid foam and 1.6 mm of rim compression.
| Shipment unit | Order per case | Billing and checking |
|---|---|---|
| Single order | 9 to 11 parts | Case number equals the list |
| Mixed orders | Two or three small orders | One band each, dividers between |
| Pallet | 12 cases, one order | The list counts cases, not cells |
The industrial export kit custom plastic outer box puts heavy parts in the 180 mm columns, thin parts the 155 mm column, and checking turns from hunting into counting.
2. Compartments and Single-Part Isolation
Nine cells are not the cavity divided by nine. Columns of 180, 180 and 155 mm add to exactly 515 mm; rows of 115 mm take 345 mm of the 375 mm width and leave 30 mm. A cell is 180×115×90 mm.
Each cell in the industrial export kit custom plastic outer box is rated 4.5 kg on a 4.2 mm floor with two cross ribs. The heaviest part is 2.4 kg, safe alone; two parts reach 4.8 kg, and eleven parts into nine cells doubles two of them.
| Compartment tolerance | Value | Effect on a single part |
|---|---|---|
| Standard cell | ±0.8 mm | A 180×115 mm part sits wall to wall, under 1.6 mm of play |
| Narrow cell | ±1.0 mm | The 155 mm column takes thin parts only |
| Doubled cell | ±1.5 mm | Two parts share one cell, 3 mm foam between them |
The ±1.5 mm follows PP shrinkage of 1.5% to 2.5%, which puts a 100 mm to 200 mm dimension at ±0.4 mm to ±0.7 mm. Loosening the cell to ±1.5 mm lets dividers drop into their slots and gives every part 3 mm of travel.
At ±1.5 mm with 11 parts forced into 9 cells, rework hours outrun the cost of the case itself.
3. Label Positions and the Opening Check Route
The industrial export kit custom plastic outer box carries three label positions, read at three moments. A 90×60 mm recess beside the lid foam carries cell number against part name; a side label carries the case number without opening; a label on each divider top is read one cell at a time.
| Label position | Location | Reading action |
|---|---|---|
| Lid recess | Beside the foam, 90×60 mm | Read on opening, cell number first |
| Side label | Centred on the long face | Case number without opening |
| Divider label | Top edge of every divider | One part, one cell, a gap shows |
Open, read the list, walk the cells from the two 180 mm columns to the 155 mm column, then glance along the divider labels before closing.
4. Volumetric Weight and Pallet Layers
The volumetric divisor is 6000. At 56×42×23 an empty industrial export kit custom plastic outer box is 54136 cm³, or 9.02 kg of chargeable volume against 8.8 kg on the scale, so empty cases travel on volume; loaded at 28.2 kg the charge returns to weight.
A 1200×1000 mm pallet holds four cases per layer in a 2×2 block of 1120×840 mm. 3 layers make 12 cases and an 840 mm stack including the 150 mm pallet.
For the industrial export kit custom plastic outer box the pallet works out at 168 kg of volumetric weight, so an empty 105.6 kg pallet ships on volume and a loaded 338.4 kg one on weight. The same pallet is billed on opposite rules.
Stacking three high is storage, where the bottom lid carries 17.6 kg; three pallet layers is transit, where it carries two full layers. They differ by an order of magnitude.
5. Repeated Open-Close Durability in Mixed Batches
In a mixed batch an industrial export kit custom plastic outer box opens about five times per order: load, verify, customs sampling, receipt, empty return. Against 2000 cycles, one case finishes 400 orders.
The lid hinge of the industrial export kit custom plastic outer box runs on a φ6 mm pin through two pairs of ears, with 0.10 mm clearance per side. After 2000 cycles that clearance must stay under 0.25 mm, or the lid edge stops sitting flush under 320 N of latch pull.
Four latches at 320 N give 1280 N against 1.6 mm of rim compression, holding the 25 mm lid foam at about ten percent preload; without it the cell edges lose restraint.
IP65 is a 6.3 mm nozzle at 12.5 L/min for 3 min, jets only, never immersion. After a hose-down the case must be dried, or water condenses again across −15 ℃ to +55 ℃ and the pin bores go first.
The cold step soaks it at −15 ℃ for 4 h, then runs 50 openings within 30 s. PP near its brittle range cracks at the ear root, not the lid edge.
Conclusion
An industrial export kit custom plastic outer box ties 9 cells, a ±1.5 mm tolerance, three label positions and a 2000-cycle hinge into one system, which keeps missing parts rare. Empty at 8.8 kg, twelve cases per 1200×1000 mm pallet, the billing rule reverses between empty and loaded. Cell numbers and the list matter more than shell thickness.
Related Reading
- Hard Case and Carton in Export Shipping
- Usable Volume with Corner Radii
- Plastic Case versus Wooden Crate
Related Products
- 8 Series — Gun Cases; Military Equipment Cases; Camera Equipment Cases; Drone Cases; Watch Cases; Knife Cases; First Aid Cases; Electronics Equipment Cases
- WL8-2812 PP Gun Case — model WL8-2812
- All protective cases and toolboxes: 7 series, 158 models