Why do two Military Supply Transport Case quotes differ by 30 percent?

Answer: Foam density, hardware brand and tooling arrangement, the three vague lines.

Can the MOQ drop below 100 units?

Answer: At a cost, usually a 1,200 CNY start fee or a 30 percent premium for purge scrap.

Can 45 days become 30?

Answer: Tooling at 28 days is nearly fixed, so 30 days needs an existing tool.

What if inspection finds thin walls?

Answer: Quarantine the batch, then choose full inspection or return; a thin case cracks in the same corner after a drop.

Buy tooling outright or amortise it?

Answer: Two or more reorders in two years favour buying; a one-off project favours amortisation.

Military Supply Transport Case Procurement: Price, MOQ, Lead Time

Quick answer: A Military Supply Transport Case quote is six cost buckets, an MOQ set by cavity count and purge loss, and a lead time that is five milestones in series. Split the quote, fix the tiers, and put milestones and limits in the contract.

What a Military Supply Transport Case Quote Should Break Down
MOQ and Volume Tiers
Lead Time Milestones for a Military Supply Transport Case
Incoming Inspection Clauses
Three Add-On Charges and How to Avoid Them
FAQ

1. What a Military Supply Transport Case Quote Should Break Down

Most Military Supply Transport Case quotes arrive as one number, with six cost buckets behind it and a surcharge for every vague one.

Bucket	Basis	CNY	Negotiation
Tooling	Mould ÷ quantity	9 to 36	Small
Resin	Weight × 1.06 × price	48 to 62	Regrind ratio
Moulding	Tonnage × cycle	42 to 68	Cavity count
Hardware	Latches, hinges, valve	30 to 55	Brand, alloy
Foam	Density × volume	25 to 45	Cutting method
Packing	Carton, pallet, testing	12 to 20	Batch size

Net weight is the one anchor a buyer can check. A 600 × 400 × 320 mm body weighs 4.2 kg, so resin at 11.5 CNY per kilogram and 1.06 scrap costs about 51 CNY. A quote showing 95 CNY there hides regrind or hardware.

Tooling is either amortised at 9 to 36 CNY per unit or bought outright for 18,000 CNY.

2. MOQ and Volume Tiers

MOQ for a Military Supply Transport Case follows cavity count and colour-change purging. A single-cavity tool wastes about 40 units per colour change, and at a 110 second cycle the press needs eight hours to absorb it, hence the 300 unit line.

Quantity	Index	CNY	Delivery
100 to 299	100	412	Stock colours
300 to 499	92	379	Seven days
500 to 999	85	350	One-colour print
1,000 and above	79	325	Print and pallet

Three clauses give a tier table meaning: fixed boundaries, no retroactivity, and an index-linked price. A 500 unit order is not invoiced at the 1,000 unit rate. Custom masterbatch starts at 500 units, and a print plate costs 800 CNY per colour.

3. Lead Time Milestones for a Military Supply Transport Case

A 45 day promise treated as one date starts disputes. Break the Military Supply Transport Case schedule into 28 days for tooling, 5 for first-article approval, 18 for production, 2 for inspection and 3 to 7 for freight. Penalties belong on milestones.

Milestone	Deliverable	Late penalty
Tooling	First shot	0.2 percent per day
First article	Signed sample	Buyer replies in five days
Production	500 units	Split runs notified
Inspection	Verdict sheet	Batch reworked

Capacity is counted in presses, not floor area. A 1200 tonne machine at 110 seconds and 20 effective hours a day makes about 650 units daily, and September to November books run three weeks out, adding 15 days.

4. Incoming Inspection Clauses

An inspection clause needs a sampling plan, acceptance limits, and an owner of the reject right. On 500 units, draw 20, accepting appearance at AQL 2.5 and critical items at AQL 1.0.

Item	Method	Limit	Disposition
Appearance	D65 plus colorimeter	Shift within 1.5	Double the sample
Wall	Ultrasonic, eight points	3.2 mm ± 0.2 mm	Quarantine
Latch	Tensile gauge	Not below 350 N	Inspect all
Sealing	15 kPa, hold 60 seconds	Drop within 1.5 kPa	Full check or return
Foam fit	Feeler gauge	Gap within 1.0 mm	Rework

First articles are approved at the plant, production samples on arrival; neither replaces the other. Two units per batch go to the drop test at 3 CNY each.

5. Three Add-On Charges and How to Avoid Them

Tooling changes are billed by the hour once the drawing is frozen, 3,000 to 8,000 CNY each, so the contract should include one free modification.

Small reorders below MOQ carry 1.3 times the unit rate or a 1,200 CNY start fee, so a framework should hold two fee-free reorders a year.

Testing comes third: salt spray for 48 hours, a minus 30 degrees soak, or a third-party report, 800 to 2,500 CNY per batch. Price it up front, and state whether the 13 percent VAT is included.

Conclusion

Price, MOQ and lead time are three views of one decision. An open quote shows which bucket a discount comes from; a milestone schedule shows where a delay lands; written limits show why the cheap batch was cheap. A Military Supply Transport Case quote with consistent definitions is what makes that comparison real.

This article discusses only the container (case body) side of specifications and design intent, and does not cover any handling, loading or use of the contents.