Quick answer: Thick-Wall Moisture-Proof Storage Bins span 60 L to 120 L on 2.6 to 3.4 mm walls, a 2.2 mm rib rebounding 0.8 mm, 18 to 28 kg ratings.

Table of contents

  • The Specification Ladder of Thick-Wall Moisture-Proof Storage Bins
  • The Sealing Rib and Its Rebound
  • What 2.6 mm to 3.4 mm Walls Buy in Load Rating
  • Stacking Height and Container Fill for Four Sizes
  • Batch Sampling Rules for Wholesale Runs
  • FAQ

1. The Specification Ladder of Thick-Wall Moisture-Proof Storage Bins

Damp air needs no pressure, only a gap. Thick-Wall Moisture-Proof Storage Bins close it with one lid mould shared by four capacities, so latch seats and rib path never change with size.

Height, not footprint, carries the difference. The largest body measures 600 × 420 × 360 mm outside, and a tier change swaps the body insert alone: no second drop test.

Wall thickness climbs with capacity: 2.6 mm for the 60 L and 80 L, 3.0 mm for the 100 L, 3.4 mm for the 120 L, the empty 60 L weighing 2.4 kg. The extra 0.8 mm sits in the side walls and base corners, never the lid face.

Specification tierWall thicknessLatchesLoad rating
60 L2.6 mm418 kg
80 L2.6 mm418 kg
100 L3.0 mm424 kg
120 L3.4 mm428 kg

A rating of 18, 24 or 28 kg is read at the lid centre: loaded to tier, four latches seated, no sag, no shift off the rim. That is the load these Thick-Wall Moisture-Proof Storage Bins describe, short of what cracks a shell.

2. The Sealing Rib and Its Rebound

The rib is a 2.2 mm half-round ridge inside the lid skirt. A closed latch flattens it and PP memory pushes it back to the rim, leaving one continuous contact line.

Thick-Wall Moisture-Proof Storage Bins in blue, black and olive on light wood shelves, lids closed and latches facing forward
Thick-Wall Moisture-Proof Storage Bins in blue, black and olive on light wood shelves, lids closed and latches facing forward

Rebound is read 24 h after closing: lid off, depth gauge from rim plane to rib crown, 0.8 mm on a new shell. Four positions around the ring, middle value kept, because the weld line makes one reading drift.

Sealing ribReboundReading
First test, new shell0.8 mmPass, cleared for stacking
5 tiers, 7 days staticAround 0.7 mmNormal relax, re-test first
28 kg on the 4th tierBelow 0.6 mmReject, cut a twin-rib tool

Load a 120 L to 28 kg, stack four high, and a rib returning under 0.6 mm lets damp in. The number is measured, not guessed.

Four latches at 150 N give 600 N across the opening, and one loose latch costs 150 N, so a quarter of the rim on these Thick-Wall Moisture-Proof Storage Bins loses pressure first.

3. What 2.6 mm to 3.4 mm Walls Buy in Load Rating

2.6 mm carries 18 kg, 3.0 mm carries 24 kg, 3.4 mm carries 28 kg. The first 0.4 mm step buys 6 kg, the second only 4 kg, because the failure point moves rather than the material softening.

At 18 kg a 2.6 mm side bulges, tips the rim out of line and the rib stops pressing evenly. At 3.0 mm the bow moves into the lid face, where failure is a sag you can see.

The window runs from −15 ℃ to +60 ℃. Cold tests the rib: PP stiffens at −15 ℃ and rebound falls away from 0.8 mm. Heat tests the wall, since +60 ℃ bows a 2.6 mm side further, so a summer top floor starts at the 3.0 mm tier on Thick-Wall Moisture-Proof Storage Bins.

4. Stacking Height and Container Fill for Four Sizes

At 60 L a 40HQ takes 620 units with a five-tier ceiling. Count follows footprint and height, and the footprint never changes, so a 120 L shell stands about 1.5 times as tall and the count falls in proportion.

Thick-Wall Moisture-Proof Storage Bins placed side by side on a table, front latch and lid ribbing showing wall thickness
Thick-Wall Moisture-Proof Storage Bins placed side by side on a table, front latch and lid ribbing showing wall thickness

Stacking is not five tiers for every size: the higher the pile, the higher the lid tier the bottom shell needs, and choosing too low drops the lid face.

Stacking tiersLid load tier at the bottomSize fitted
3 tiers18 kg60 L and 80 L, loaded
4 tiers24 kg100 L, loaded
5 tiers28 kg120 L loaded, or empty in store

A pallet run goes through an ISTA 3A sequence before the 40HQ is booked; with 620 units a box and five tiers, the bottom row sits sealed for weeks and its rib relaxes.

5. Batch Sampling Rules for Wholesale Runs

A wholesale lot of Thick-Wall Moisture-Proof Storage Bins is cut by mould, resin batch and wall tier together, never by colour. Sampling begins with wall thickness on four sides of the rim, rib height and latch force; appearance comes last.

Thickness is read on an ultrasonic gauge at five points per wall. The 2.6 mm tier is judged at plus or minus 0.1 mm, and an outlier sends the reader to mould temperature first.

Rebound is judged at 0.8 mm after 24 h and latches at 150 N, five shells pulled and each on a force gauge. Two failures on either reading take the lot off the loading list and into a second stacking run.

Every lot carries five columns: size, wall tier, rebound, latch force, stacking tiers. Price gaps between wholesale lots land on those columns, never on the colour chip. Buyers comparing lots get further with those columns than with a shade card.

Conclusion

Four capacities, three wall tiers and one 2.2 mm rib carry the argument: 2.6 mm for 18 kg, 3.0 mm for 24 kg, 3.4 mm for 28 kg, with four latches at 150 N holding the rim into one line. Stacking follows the size tier, three for loaded dispatch and five in static storage. Between lots, Thick-Wall Moisture-Proof Storage Bins differ in thickness tolerance, rebound and latch force, not in colour.

Related Reading

Related Products