Quick answer: A 60 L bin body at 2.8 mm reads 88% versus 72% transmittance and 12% versus 38% haze, so Virgin vs Recycled PP turns on optics before toughness.

Table of contents

  • Reading Virgin vs Recycled PP in the Bin Body
  • Where Transmittance and Haze Diverge
  • Notched Impact and Low-Temperature Grades
  • Holding Performance at a 30% Regrind Share
  • Three-Minute Incoming Differentiation
  • FAQ

1. Reading Virgin vs Recycled PP in the Bin Body

Two bins labelled 60 L sit under one lamp, one clear and one fogged, and the price gap sits in the pellets. On a body of 600 × 420 × 350 mm and a 2.8 mm wall, with mould and melt temperature fixed, every visible difference comes from resin. Virgin vs Recycled PP reads at three levels: transmittance and haze, notched impact and cold retention, then melt flow, density and shrinkage.

Optics is where readers slip, booking a polished surface against a pellet batch. The comparable method samples one mould and one melt temperature.

Regrind shareTransmittanceHazeWhat the reading means
0%, virgin88%12%Optics and impact both at the top
15%82%20%Everyday grade, appearance hardly moves
30%72%38%The divide, toughness starts to fall
45%61%52%Dark opaque mouldings only

Only the regrind share changes across those four rows. Each step up costs 6 to 10 points of transmittance and more haze than that, so read haze first: this is where Virgin vs Recycled PP splits.

2. Where Transmittance and Haze Diverge

Light crossing a 2.8 mm wall is stopped twice, by crystalline regions and by foreign particles. Virgin resin keeps its chains regular and its spherulites below the wavelength of visible light, so transmittance reaches 88% and haze holds at 12%. Regrind has been through one heat history: chains shorten, spherulites coarsen, pigment left from sorting adds scatterers. Transmittance drops to 72% and haze climbs to 38%. The wall has not changed, only how often light scatters inside it.

Virgin vs Recycled PP storage bins stacked in layers on pallets and wrapped in clear film inside the workshop, beside an empty yellow rack
Virgin vs Recycled PP storage bins stacked in layers on pallets and wrapped in clear film inside the workshop, beside an empty yellow rack

Haze explains how a body looks better than transmittance does. At 88% with 12% a shopper reads what sits inside; at 72% with 38% the colour greys out and pale items merge into the wall.

Haze readingTransmittanceWhat the eye seesMould finish
8% to 12%88%Clear, internal layers readableHigh polish
20% to 25%80%Slight fog, pale parts whitenStandard polish
35% to 40%72%Noticeably grey, dark parts opaqueFine texture
Above 50%61%Practically opaqueMatte or grain

The finish column gets ignored. That same regrind on a fine texture adds 3 to 5 points of haze, so judging Virgin vs Recycled PP starts there.

3. Notched Impact and Low-Temperature Grades

Toughness cannot be settled at room temperature alone. Following the cantilever notched method of GB/T 1843, a virgin body posts 28 kJ/m² at 23 ℃ while a 30% blend posts 16 kJ/m². Cool the same specimens to −10 ℃ and virgin retention sits near 62% while the blend falls faster. In winter the corners meet the tail-lift first, so Virgin vs Recycled PP is judged here.

Low-temperature stepNotched impactRetentionWhere it applies
23 ℃28 kJ/m²100%Ambient warehouse and shop floor
0 ℃22 kJ/m²79%Yangtze basin winters
−10 ℃17 kJ/m²62%Unheated northern warehouses
−20 ℃11 kJ/m²39%Virgin formulation only

The −20 ℃ to +60 ℃ service window is not a pass window for impact. The lower limit decides whether a body cracks in a cold store; the notched steps decide whether it deforms and absorbs energy first.

Rejection is written on the cold step, never under a lamp: at more than 30% regrind with notched impact below 12 kJ/m² at −10 ℃, the formulation has no business going back onto a home storage bin line.

4. Holding Performance at a 30% Regrind Share

The 30% line marks where appearance, toughness and processing hold together. Regrind at a melt flow of 8 g/10min blends three to seven with virgin and stays inside a 7 to 9 g/10min band, so cycle time does not move. Density of 0.905 g/cm³ nearly matches virgin, and shrinkage of 1.6% sits in the same slot, leaving the cavity untouched.

Virgin vs Recycled PP storage bins filling white shelves on both sides of a showroom, with long handled cases displayed on the floor
Virgin vs Recycled PP storage bins filling white shelves on both sides of a showroom, with long handled cases displayed on the floor

Above that, shrinkage drifts from 1.6% past 1.8% and lid fit goes first: the lid still latches, but the rim gap turns uneven, so Virgin vs Recycled PP is no longer a swap that leaves the mould alone.

A rating of 25 kg stacked 5 high depends on wall and lid stiffness together, and a higher share lowers it until the bottom lid dishes under four bins.

5. Three-Minute Incoming Differentiation

Incoming inspection needs no lab report. Three moves settle most of it. Look first: spread pellets on white paper, where virgin shows even colour and a translucent cut while regrind carries mixed chips and black specks. Weigh next: a cup of the same volume deviating more than 0.01 from 0.905 g/cm³ deserves a filler check. Bend last: fold a test bar moulded with the body batch, where virgin whitens at 90° without breaking and regrind snaps near 60°. The bend is sharpest, because where whitening starts says more than whether the bar breaks.

Only when all three disagree does the batch go to the lab for notched impact and haze.

A dark opaque model carries 38% haze without damage; a clear or pale one cannot, so Virgin vs Recycled PP simply splits into two product lines.

Conclusion

The pellet ledger closes on three readings: 88% against 72% transmittance, 12% against 38% haze, and 28 against 16 kJ/m² at −10 ℃. At or under 30% regrind, with a melt flow of 8 g/10min, a density of 0.905 g/cm³ and shrinkage of 1.6%, the mould stays untouched and 5 high stacking under a 25 kg rating holds. For clarity, drop under 15%; for toughness, return to virgin. Virgin vs Recycled PP is settled on the cold step, not under the lamp.

Related Reading

Related Products