Boxknow
DJ & Stage Event Cases: Move the Gear Without a Scratch
DJs and event crews carry controllers, wireless mics, cables and lighting that are precise and scratch-prone. An event case fixes the controller, separates mics, manages cables and survives being wheeled through venues. This guide covers controller protection, cable management, shock and show-day use.
Read Article →
Veterinary & Animal Care Cases: Move Clinic Gear Safely
Vets and animal caregivers carry scanners, syringes, medicines and instruments that are precise and contamination-sensitive. A care case fixes the scanner, isolates meds, controls hygiene and survives mobile clinic runs. This guide covers scanner protection, medicine isolation, cleaning and field use.
Read Article →
Cycling & Bike Gear Cases: Carry the Computer and Tools
Cyclists carry a bike computer, multi-tool, lights and spares that are precise and easy to lose. A bike case fixes the computer, separates tools, absorbs shock and survives being tossed in a car or train. This guide covers computer protection, tool layout, weather and ride-day use.
Read Article →
Telescope & Astronomy Cases: Move the Optics Without a Scratch
Astronomers carry an optical tube, eyepieces, a mount head and tripod parts that are precise and coating-sensitive. A telescope case fixes the tube, separates eyepieces, absorbs shock and survives being carried to a dark site. This guide covers optics protection, eyepiece layout, weather and observation use.
Read Article →
Coffee & Barista Equipment Cases: Move the Gear Clean
Baristas and mobile cafes carry a portafilter, tamper, scale and handheld grinder that are precise and hygiene-sensitive. A coffee case fixes the portafilter, separates tools, stays clean and survives mobile events. This guide covers portafilter protection, tool layout, cleaning and event use.
Read Article →
Skiing & Snowboard Cases: Move the Gear Through Snow
Skiers and boarders carry goggles, an avalanche beacon and bindings that are precise and cold-sensitive. A ski case fixes the goggles, isolates the beacon, absorbs shock and survives being carried through snow. This guide covers goggle protection, beacon isolation, cold and slope use.
Read Article →
Case Gasket and O-Ring Materials: EPDM, Silicone and Closed-Cell Foam Compared
The seal is the part that makes an IP rating real, and the part most often specified by habit rather than by environment. EPDM, silicone and closed-cell foam differ in compression set, temperature range and chemical resistance, and the right choice depends on what the case will meet more than on what the catalogue lists.
Read Article →
Case Latch and Hardware Materials: Nylon, Stainless Steel and Aluminium Compared
The shell takes the impact, but the latches, hinges and handles decide whether the case opens after it. Over-centre latches work by geometry rather than by force, and the material they are made from sets their fatigue life, their corrosion behaviour and how they feel after a few thousand cycles.
Read Article →
Pressure Equalisation Valves on Protective Cases: What They Do and When You Need One
A pressure equalisation valve lets a sealed case breathe. It passes gas through a hydrophobic microporous membrane while blocking liquid water, which solves two opposite problems at once: vacuum lock after a flight, where internal pressure holds the lid shut, and over-pressure, where a case sealed at altitude bulges at sea level.
Read Article →
ESD and Anti-Static Protective Cases: Surface Resistivity and When It Matters
An anti-static case is specified by a number, not an adjective. The industry works in surface resistivity bands: conductive, dissipative and insulative, with the dissipative band being the target for most electronics handling. Under ANSI/ESD S20.20 the dissipative band runs from 1x10^4 to below 1x10^11 ohms; IEC 61340-5-1 sets it from 1x10^5 to 1x10^11 ohms.
Read Article →
Watch Storage Cases: What Actually Protects a Collection
A watch does not usually fail from impact. It fails slowly, from humidity cycling behind the crystal, from UV fading a dial or a strap, from magnetisation, and from a strap stored under constant bend. A storage case should address those four mechanisms before it addresses drops.
Read Article →
Fishing and Marine Gear Cases: Salt, Hooks and Washdown
Marine duty is harder on a case than almost any other environment, because the threats are simultaneous: salt spray attacks hardware, grit abrades seals, sharp hooks and blades puncture linings, and everything is wet when you pack it. The case has to seal, drain, survive a washdown and not corrode shut.
Read Article →