Boxknow
Electronic Component Tray Cases: Sorting & ESD Protection
A selection guide for ESD-safe component handling cases: zoned inserts for reels, JEDEC trays and stick tubes, static-dissipative materials and grounding paths, MSL and J-STD-033 humidity management, IP54/IP65/IP67 sealing choices and transport validation points.
Read Article →
Energy-Storage Battery Module Cases: UN38.3 & Thermal Safety
A design guide for energy storage battery module cases: the eight UN38.3 tests, UN3480/3481 and IATA PI965-PI967 air freight limits, SoC control, runaway propagation barriers and controlled relief, insulation and condensation management, IP65/IP67 sealing and transport validation points.
Read Article →
EV Charging Power-Module Cases: Power-Electronics Protection
Design guide for EV charging power-module transport cases: IEC 60529 / GB/T 4208 IP grades, vibration restraint, condensation control, ESD and UL94, plus ISTA and GB/T 4857 validation with quantitative acceptance criteria.
Read Article →
Industrial PC & Edge Computing Cases: Industrial Electronics Protection
A selection guide to industrial PC and edge computing transport cases: cantilever support for heatsinks and expansion cards, HDD versus SSD transport behaviour, ESD protection, moisture, salt spray and mould control, IP67 sealing to IEC 60529 and GB/T 4208, pressure equalization valves, ISTA and GB/T 4857 testing and OEM/ODM cost structure.
Read Article →
Laboratory Animal Transport Cases: Temperature, Ventilation & Biosecurity
Design guide for laboratory animal transport cases: IATA LAR container requirements, GB 14925 environmental parameters, passive ventilation and air-exchange validation, HEPA filtration margin, phase-change temperature control and biosecurity barriers.
Read Article →
Machine Vision Camera & Lens Cases: Optical & Calibration Protection
How to protect machine vision cameras and lenses in transit: optical face relief, low-outgassing clean liners, calibration state retention, IP65/IP67 sealing and test criteria.
Read Article →
Metal 3D-Printing Powder Storage Cases: Explosion Safety & Moisture
A selection guide to metal 3D-printing powder storage cases: ATEX dust zoning, IP65/IP67 sealing, antistatic grounding, inerting and pressure equalisation valves, insert retention and transport compliance acceptance.
Read Article →
Optical Lens & Coated-Element Cases: Cleanroom & Scratch Protection
Design guide for optical lens and coated-element transport cases: ISO 14644 cleanliness classes, GB/T 1185 surface criteria, ISO 9211 coatings, non-contact edge support inserts, low-shedding materials, moisture control and ESD.
Read Article →
PCB Transport Cases: ESD-Safe & Moisture-Proof Handling
A PCB transport case selection guide: static-dissipative materials and grounding paths, moisture barrier packaging and desiccant sizing, vertical slots against warp, stacking stops and automation compatibility, with IPC and ESD acceptance points.
Read Article →
3D Printing Resin & Filament Storage Cases: Moisture & Light Control
A selection guide to 3D printing resin and filament storage cases: moisture absorption and hydrolytic degradation, target humidity by material, silica gel dosage and regeneration, humidity monitoring, UV and light blocking, temperature and resin viscosity, secondary containment and leak control, gasket materials, stacking and OEM/ODM.
Read Article →
Robot End-Effector Cases: Gripper & Quick-Changer Protection
How to protect robot end effectors in transit: relief liners for tool changer datums, force sensor zero retention, gripper rail protection, IP65/IP67 sealing and acceptance criteria.
Read Article →
Sealed Archive & Classified-Media Cases: Fire, Moisture & Magnetic Protection
Design guide for sealed archive and classified-media cases: ISO 11799 storage environment, UL 72 fire classes, acid-free liners and humidity buffering, magnetic shielding effectiveness and re-testing, tamper seal custody chains and ISTA validation.
Read Article →