Boxknow
Lab Sample-Prep Equipment Cases: Grinding & Digestion Component Protection
Protective case solution for lab sample-prep equipment: individual pockets for grinding jars and digestion vessels, sealing faces kept uncompressed, PTFE/PFA barrier layers against cross-contamination, cleanable liners with cleanliness status marking, IP65/IP67 selection, GB/T 4857 validation and an AQL acceptance checklist.
Read Article →
Materials Testing Machine Cases: Fixture & Sensor Component Protection
Protective case solution for materials testing machine fixtures and load cells: suspended grip-face pockets, individual ESD-protected sensor pockets, four-layer rust prevention for machined metal, IP65/IP67 selection, ISTA and GB/T 4857 validation, and an AQL acceptance checklist.
Read Article →
Metrology Standard & Gauge Cases: Reference Standard & Gauge Block Protection
Protective case solution for metrology reference standards and gauge blocks: suspended wringing faces, layered block trays, vibration isolation for force and torque standards, temperature and humidity stability with data logging, sealing with desiccant, GB/T 4857 validation, seal traceability and an AQL acceptance checklist.
Read Article →
Pressure Vessel Component Cases: Head & Flange Component Protection
Selection guide for pressure vessel component cases: V1-V4 graded protection for elliptical heads, weld-neck flanges, tubesheets and shell courses, with form-fitting saddles, sealing-face isolation, insert comparison and GB/T 4857 test references.
Read Article →
Scissor Lift Cases: Scissor Arm & Hydraulic Component Protection
Scissor lift parts case guide: layered arm stacking with multi-point support against bending, pin bore sleeves and divided pin cavities, full piston rod coverage and port caps, safety-item packing for guardrails, and IP67 sealing.
Read Article →
Stentering & Tenter Frame Cases: Chain & Duct Component Protection
Stentering and tenter frame parts case guide: large-diameter rust-sealed chain coiling, full-length rail support, duct port forming rings and sealed insulation, IP65/IP67 moisture control, with ISO 9227 salt spray and GB/T 4857 validation.
Read Article →
Textile Printing Cases: Screen & Squeegee Component Protection
Textile printing parts case guide: vertical screen frame slots with three-sided restraint, suspended squeegee edge protection, rotary screen mandrel support and magnetic rod V-cradles, plus IP65/IP67 moisture control and geometry re-measurement validation.
Read Article →
Winch & Hoisting Parts Cases: Drum & Gear Component Protection
Winch and hoisting parts case guide: drum saddle supports and rope groove guards, multi-point support against bending resonance, gearbox shaft sleeves and port caps, large-radius wire rope coiling, IP67 sealing and salt spray protection.
Read Article →
Aluminum Extrusion Die Cases: Die & Stem Component Protection
Selection guide for aluminum extrusion die cases: bearing-land relief inserts, port-hole bridge support, multi-point stem restraint, residual-heat release lines, IP65/IP67 sealing, ISTA and GB/T 4857 verification, and AQL acceptance.
Read Article →
AS/RS Stacker Crane Cases: Travel & Fork Component Protection
Stacker crane and AS/RS parts case guide: rigid location and two-stage vibration isolation for travel wheels, racks, rails, fork arms, servos and encoders, with IP65/IP67 sealing, ESD and VCI protection.
Read Article →
Automotive Plastic Parts Molds Cases: Injection Mold & Gauge Protection
Selection guide for automotive plastic parts mold cases: profile cradles that relieve parting surfaces and cavities, datum unloading for gauges, IP65/IP67 sealing, IATF 16949 tooling management and ISTA and GB/T 4857 transport verification.
Read Article →
Conveyor Roller & Parts Cases: Roller & Drive Component Protection
Conveyor roller and drive component case guide: vertical slot and half-round inserts to prevent roller face damage, shaft end and coating protection, motorized drum moisture and ESD control, and IP65/IP67 sealing.
Read Article →