Boxknow
How Do You Write Tender Specifications for Protective Cases? Key Points for Compiling a Technical Specification
The core of protective case tender parameters is replacing adjectives with evaluable values. This guide gives a four-layer structure covering operating conditions, material and structure, performance and rating, and inspection and documents, plus a vague-vs-evaluable table, sampling and AQL clauses and packaging terms.
Read Article →
How Should Protective Cases Be Stored? Moisture and Sunlight Rules for Warehousing
Covers stacking height, moisture and UV protection, temperature and humidity control and FIFO rules for protective case warehousing, plus long-term storage care for seals and latches.
Read Article →
How Long Is the Warranty on a Protective Case? Key Points for Negotiating After-Sales Terms
Protective case warranties are commonly 12 months, 12 to 24 months for industrial and outdoor cases, and 24 to 36 months for military and fit-out projects. This guide covers scope and exclusions, start date, consumable tiering, failure determination, response timeframes, cost allocation, extensions and spare parts duration.
Read Article →
Custom vs Standard Protective Cases: How to Decide (A Selection Decision Tree)
Choosing between custom and standard protective cases is a layered decision, not a value judgment. Work through five gates: core operating conditions, dimensions and inserts, sealing and IP rating, volume and tooling amortization, and certification and IP ownership. This guide covers the four layers of customization, a decision table, break-even math, and acceptance and golden-sample clauses.
Read Article →
How to Clean and Maintain a Protective Case: Cleaning Taboos by Material
Cleaning a protective case means zoning, matching the method to the material, and setting the right frequency. The shell can be washed, the gasket may only be wiped and dressed with grease, metal parts need rust protection, and foam inserts should be cleaned dry. This guide covers five cleaning zones, a six-step method, taboo tables by material, disinfection practice, and maintenance intervals.
Read Article →
How to Tell a Genuine Protective Case from a Fake: Identifying Recycled vs Virgin Resin
Telling a genuine protective case from a fake comes down to material source and structural integrity. Recycled resin lowers toughness, weathering, and service life, while stripped structure hides in wall thickness, ribs, and the seal groove. This guide covers six identification methods: appearance, hand and weight, cross-section, documents, price logic, and accessories, plus an on-site checklist and a handling process.
Read Article →
How Long Do Protective Cases Last? The Key Factors That Decide Durability
Examines the service life of protective cases and how material, seals, hinges, latches, environment and maintenance affect durability, with care tips and replacement criteria.
Read Article →
Rent or Buy a Protective Case? The Economics of Short-Term Projects
Rent or buy comes down to three variables: holding period, reuse frequency, and residual value. This guide compares three acquisition models, six core variables, a break-even formula, and visible versus hidden costs, then sets the boundaries where each option wins and covers rental contract clauses, residual value management, and a rapid decision table.
Read Article →
Can a Protective Case Be Repaired? Fixing a Cracked Shell
A protective case can be repaired, but classify the crack first. Surface cracks in flat walls can be welded or bonded on site, while cracks at ribs, corners or the lid seal channel are structural damage. Covers crack grading, PP/ABS/PC and glass-filled processes, welding, bonding and mechanical patching, seal restoration and verification.
Read Article →
What to Do When a Junction Box Rusts: Stainless Steel vs Cast Aluminium Corrosion Resistance
Five kinds of rust explained. Compare 304 and 316 by PREN, cast aluminium pitting and galvanic risk, plus salt spray data and a 10-year cost ledger.
Read Article →
Can You DIY a Waterproof Junction Box: Three Safety Red Lines for Outdoor Electrical Sealing
Three red lines for DIY outdoor electrical work: isolation and RCDs, compliance and liability, sealing integrity, a twelve-step procedure and a checklist.
Read Article →
How to Install an Electrical Enclosure: Standard Practice for Outdoor Waterproof Junction Boxes
IP67 junction box installation: tools, mounting heights, hole sizes, gland torque, diagonal tightening and a fifteen-point checklist, to IEC 60529 and EN 62444.
Read Article →